Select a different country or region to see content for your location.
United States
14:49:14 GMT+0000 (Coordinated Universal Time)
LTE20-130-B-KGT1605-MM-1
Linear table
Linear tables with closed shaft guidance system and ball screw drive, with shaft support block type B, with bellows, with double nut
Frequently bought together
Main Dimensions & Performance Data
| B1 | 130 mm | Total Width |
| L | 130 mm | Length of Carriage |
Mounting dimensions
| B4B | 130 mm | Width of Shaft Support Blocks |
| b87 | 62 mm | Tolerance ±0,2 |
| d85 | 9 mm | Tolerance h7 1 |
| d86 | 50 mm | Tolerance g7 |
| G3 | M10 | Thread |
| G43 | M8 | Thread |
| G87 | M6x15 | Thread |
| h85 | 25 mm | |
| h87 | 30 mm | Tolerance ±0,2 |
| JB43 | 115 mm | |
| JL43 | 115 mm | |
| jB4 | 108 mm | |
| jL3 | 10 mm | |
| K43 | M6 | Thread |
| L85 | 23 mm | |
| L86 | 8 mm | |
| L88 | 37 mm | |
| S3 | 18 mm | |
| T3 | 10 mm | |
| t43 | 18 mm | Depth of Thread |
Dimensions
| BB | 20 mm | Length of Bellows Fastener |
| FBL | 1,33 | Effective length factor of bellow |
| H1 | 46 mm | Height of Carriage |
| H4B | 42 mm | Height of Shaft Support Blocks |
| H5B | 42 mm | Height of Shaft Support Blocks |
| h1 | 23 mm | |
| h4B | 21 mm | |
| h5B | 21 mm | |
| L4 | 29 mm | Length of Shaft Support Block with Drive System |
| L5 | 20 mm | Length of Shaft Support Block without drive System |
| T56 | 3,75 mm | |
| D7 | 20 mm | Ø Shaft, Tolerance h7 |
Technical data
| RX | 74,6 mm | |
| RZ | 72 mm | |
| S | 5 mm | Safety Distance |
| mLAW | 1,82 kg | Mass of Carriage |
| vmax | 0,25 m/s | Maximum Speed |
| amax | 10 m/s2 | Maximum Acceleration |
| CI | 4.140 N | Load direction I: compressive load |
| C0I | 4.920 N | Load direction I: compressive load |
| CII | 4.140 N | Load direction II: tensile load |
| C0II | 4.920 N | Load direction II: tensile load |
| CIII | 4.140 N | Load direction III: lateral load |
| C0III | 4.920 N | Load direction III: lateral load |
| M0x per | 178 Nm | Max. permissible static moment per Carriage 2 |
| M0y per | 155 Nm | Max. permissible static moment per Carriage 2 |
| M0z per | 138 Nm | Max. permissible static moment per Carriage 2 |
| d0 | 16 mm | Spindle Diameter |
| P | 5 mm | Spindle Pitch |
| C | 9.300 N | Load capacity Spindle Nut dyn 3 |
| C0 | 13.100 N | Load capacity Spindle Nut stat 3 |
| Ca | 13.400 N | Load capacity fixed Spindle bearing dyn |
| C0a | 18.800 N | Load capacity fixed Spindle bearing stat |
Additional information
6 Nm | Max. permissible drive torque | |
KB20-P | Linear Ball Bearings 4 | |
ZKLN1034-2RS-PE | Rolling Bearings (locating bearing) | |
0,025 mm | Repeat accuracy ± | |
0,313 kg*cm2 | Mass moment of inertia of threaded Spindle |
Temperature range
0 °C | Minimum operating Temperatur | |
80 °C | Maximum operating Temperatur |
Footnotes
1
Thread witness marks may be present on the pin.
2
These values apply if load is evenly distributed over all four linear ball bearings. Values indicate single loads. These must be reduced for combined loads. For design criteria of the linear guidance system, see Catalogue WF1.
3
Basic load ratings in accordance with DIN 69051. Due to the modified calculation algorithms in DIN 69051, the basic load ratings Ca and C0 may differ in comparison with older data.
4
The deflection of the shafts must be taken into consideration. Design of linear ball bearing guidance systems: see Catalogue WF1.
Downloads:
Your current product variant
| Size code | 20 | |
| Length of carriage | 130 | 130 mm |
| Version | B | |
| Drive type | KGT | Ball screw drive |
| Spindle pitch | 05 | 5 mm |
| Spindle diameter | 16 | 16mm |
| Spindle nut design | MM | Double cylinder nut |
| Bellow | 1 | Yes |
