Select a different country or region to see content for your location.
United States
11:56:12 GMT+0000 (Coordinated Universal Time)
ZKLF3080-2RS-PE
Axial angular contact ball bearing
Axial angular contact ball bearing ZKLF..-2RS-PE, double direction, screw mounting
Replaces
ZKLF 3080.2RS PE
Preferred product
Hauptabmessungen und Leistungsdaten
| d | 30 mm | Bohrungsdurchmesser |
0 mm | Oberer Toleranzwert Innendurchmesser | |
-0,01 mm | Untere Toleranz Innendurchmesser | |
| D | 80 mm | Outside diameter |
0 mm | Outside diameter upper tolerance | |
-0,013 mm | Outside diameter lower tolerance | |
| B | 28 mm | Width |
0 mm | Width upper tolerance | |
-0,25 mm | Width lower tolerance | |
| Ca | 29.000 N | Dynamische Tragzahl, axial |
| C0a | 64.000 N | Statische Tragzahl, axial |
| Cua | 2.900 N | Ermüdungsgrenzbelastung, axial |
| nG Grease | 5.000 1/min | Grenzdrehzahl für Fettschmierung |
| nϑ | 2.200 1/min | Thermally safe operating speed |
| MR | 0,5 Nm | Lagerreibmoment |
| ≈m | 0,731 kg | Weight |
Anschlussmaße
| Da max | 53 mm | Maximaler Anlagedurchmesser Gehäuse |
| da min | 40 mm | Mindestdurchmesser der Welle |
| t1 | 0,1 mm | Position tolerance of bore in the housing |
M6 | Size of fixing screws | |
| na | 6 | Number of holes in adjacent construction |
| ta | 60 ° | Pitch separation angle of holes in adjacent construction |
M6 | Anschlussgewinde für Schmierung |
Abmessungen
| d1 | 45,5 mm | Rib diameter inner ring |
| rmin | 0,3 mm | Minimaler Kantenabstand |
| r1 min | 0,6 mm | Minimaler Kantenabstand |
| J | 63 mm | Pitch circle diameter fixing holes |
| d2 | 6,8 mm | Durchmesser Befestigungsbohrungen |
| b | 3 mm | Width of extraction slot |
| I | 19 mm | Abstand der Abziehnut |
| n | 12 | Pitch quantity of fixing holes |
| t | 30 ° | Pitch separation angle of fixing holes |
| a | 60 ° | Druckwinkel |
Temperaturbereich
| Tmin | -30 °C | Operating temperature min. |
| Tmax | 120 °C | Operating temperature max. |
Zusätzliche Informationen
| caL | 850 N/µm | Rigidity axial |
| ckL | 300 Nm/mrad | Tilting rigidity |
| Mm | 0,73 kg*cm2 | Massenträgheitsmoment |
5 µm | Planlauf | |
ZM30 | Recommended INA precision locknut for radial locking | |
AM30 | Recommended INA precision locknut for axial locking | |
| MA | 32 Nm | Tightening torque for the recommended INA precision locknut |
9.947 N | Required locknut force axial |